Organizational Psychology - Discussion #4 - Psychology
For the fourth discussion post, please read the attached article below from Personnel Review:
Here are the key questions I want you to discuss:
What is Learning Goal Orientation (LGO)? In your own words, how would you describe someone with a high LGO?
How is Work engagement defined? Why would LGO be related to an individuals level of work engagement?
How is Reflection conceptualized in the study? How did the researchers measure this? What is its role in the conceptual model?
What is Job Crafting, and what element of job crafting did the researcher focus on? What is its role in the conceptual model? Furthermore, why do they think that the relationship between LGO and job crafting is contingent on reflection?
Why do the researchers think that Job crafting is associated with Work Engagement?
Does Job Crafting explain the relationship between LGO and Work Engagement? Was this indirect effect different for people with low versus high levels of reflection? How so?
Based on your interpretation of the study findings, offer at least one recommendation you would propose to organizational leaders or Human Resource managers.
Effect of learning goal orientation
on work engagement through
job crafting
A moderated mediation approach
Makoto Matsuo
Graduate School of Economics and Business Administration, Hokkaido
University, Sapporo, Japan
Abstract
Purpose – The purpose of this paper is to examine the mechanism by which learning goal orientation (LGO)
promotes work engagement through job crafting (seeking challenges).
Design/methodology/approach – A moderated mediation model was tested using survey data from 266
public health nurses and hospital nurses in Japan.
Findings – The results indicated that job crafting partially mediated the relationship between LGO and work
engagement, and that the mediation effect was stronger when reflection was high (vs middle and low).
Research limitations/implications – Although common method bias and validity of measurement were
evaluated in this paper, the survey data were cross-sectional.
Practical implications – The results suggest that selecting people with a stronger sense of LGO may be a
useful strategy for promoting job crafting and work engagement in an organization. Additionally,
organizations should give employees opportunities to reflect on their jobs and to craft them into more
challenging ones in the workplace.
Originality/value – Although little is known about mechanisms by which LGO promotes work engagement,
this study found that job crafting and reflection play important roles in linking LGO and work engagement.
Keywords Quantitative, Reflection, Work engagement, Moderated mediation, Learning goal orientation,
Job crafting
Paper type Research paper
Introduction
Work engagement, or a positive, fulfilling, work-related state of mind (Schaufeli et al., 2002),
has emerged as a significant construct in the applied psychological and management
literature because it has been shown to promote both well-being and performance in
employees (Saks, 2006; Van De Voorde et al., 2016). The growing interest in work engagement
gives rise to the need for better understanding of its antecedents (Woods and Sofat, 2013).
Although numerous factors have been examined as antecedents (e.g. self-regulation
behaviors, personality traits, psychological meaningfulness, job autonomy), learning goal
orientation (LGO), known as a disposition that intrinsically motivates employees (Cerasoli
and Ford, 2014), may be one of the major determinants of work engagement (Adriaenssens
et al., 2015; Jones et al., 2017) because work engagement constitutes a form of intrinsic
motivation (Demerouti et al., 2015). Despite their importance, little is known, from previous
studies, about the factors that mediate the relationship between LGO and work engagement.
To address this gap, the present research examined the LGO–engagement relationship in
terms of “job crafting” (seeking challenges), conceptualized based on job demands-resources
(JD-R) theory (Demerouti et al., 2001), as well as “reflection,” which plays an important role
in the learning process (Kolb, 1984; Mezirow and Taylor, 2011). These two factors were
selected based on “self-determination theory (SDT),” which proposes that autonomous
motivation with intrinsic goals (as opposed to controlled motivation with extrinsic goals)
Personnel Review
Vol. 48 No. 1, 2019
pp. 220-233
© Emerald Publishing Limited
0048-3486
DOI 10.1108/PR-11-2017-0346
Received 17 November 2017
Revised 10 February 2018
Accepted 15 February 2018
The current issue and full text archive of this journal is available on Emerald Insight at:
www.emeraldinsight.com/0048-3486.htm
This work was supported by JSPS KAKENHI (Grant No. 26285078).
220
PR
48,1
is associated with greater health, well-being and performance (Deci and Ryan, 2008; Ryan
and Deci, 2000). Specifically, this study hypothesized that job crafting (seeking challenges)
mediates the relationship between LGO and work engagement, because LGO triggers
self-initiated behaviors targeted at seeking challenges (Petrou et al., 2015), from which high
work engagement may result. It was also predicted that reflection positively moderated the
LGO–job crafting (seeking challenges) relationship, because reflective activities, such as
reviewing and re-assessing work processes, could conceivably be understood as effective
means for redesigning jobs. Crafting jobs through reflection may be a critical process for
intrinsically motivated individuals who want to work autonomously. As such, the main
contribution of this study is to explain the mechanisms by which LGO facilitates work
engagement in terms of job crafting and reflection using a moderated mediation model.
Literature review
Work engagement
Work engagement is defined as “a positive, fulfilling, work-related state of mind that is
characterized by vigor, dedication and absorption” (Schaufeli et al., 2002, p. 74). That is,
engaged employees are working energetically (vigor), are highly involved in their work
(dedication) and are fully concentrated and happily engrossed in their work (absorption)
(Bakker et al., 2008).
It is important to note that work engagement differs conceptually from related constructs
such as organizational commitment or job satisfaction, because work engagement explicitly
refers to the voluntary behavioral aspects of work (De Clercq et al., 2014). Demerouti et al. (2015)
stated that work engagement represents a form of intrinsic motivation, where the behavior is
performed for itself to experience the pleasure and enthusiasm inherent in the work activity.
Work engagement is a persistent, pervasive and affective cognitive state rather than a
momentary and specific state or behavior (Schaufeli et al., 2002).
Past empirical studies have shown that work engagement is positively associated with
employee well-being, job satisfaction, affective commitment, the intent to remain employed,
less burnout, innovative work behavior and higher job performance (Agarwal, 2014; Dalal
et al., 2012; Lu et al., 2014; Saks, 2006; Schaufeli et al., 2006; Yalabik et al., 2015). Similarly,
Bakker and Demerouti (2008) argued that work engagement positively influenced
performance through the experiences of positive emotions and better health, having a
measure of agency over their own jobs and personal resources, and the transfer of their
engagement to others.
With regard to its antecedents, work engagement has been shown to be influenced by
various factors, such as organizational trust (Agarwal, 2014; Ugwu et al., 2014), job
involvement (Scrima et al., 2014), self-regulation behaviors (De Carlo et al., 2014), personality
traits, psychological meaningfulness (Woods and Sofat, 2013), job autonomy (Zhang et al.,
2017), job crafting (Crawford et al., 2010; Lu et al., 2014; Petrou et al., 2012) and LGO
(Adriaenssens et al., 2015; Jones et al., 2017).
The results of these studies can be explained by SDT, which is an empirically based
theory of human motivation, development and wellness within social contexts that
differentiates between autonomous and controlled motivation (Deci and Ryan, 2011). Within
SDT, a learner’s motivational orientation is classified as either autonomous or controlled,
while the content of their goals is classified according to intrinsic goals (e.g. community
contributions or personal development) and extrinsic goals (e.g. fame or financial success)
(Vansteenkiste et al., 2006). Previous studies in SDT indicate that the more autonomous
orientations of intrinsic goals are associated with work engagement, perceived competence
and learning (Deci and Ryan, 2008, 2011; Vansteenkiste et al., 2006).
Based on SDT, this study focused on the role of job crafting and LGO in enhancing work
engagement. Job crafting is regarded as an autonomous work-related activity, whereas LGO
221
Effect of
learning goal
orientation
is a type of intrinsic goal. These two factors may promote work engagement, which
is a work-related state of mind involving intrinsic motivation (Demerouti et al., 2015;
Schaufeli et al., 2002). As mentioned earlier, there is a possibility that job crafting mediates
the relationship between LGO and work engagement, because LGO may intrinsically
motivate employees to change their jobs to more challenging ones, resulting in high work
engagement. Thus, the literature on LGO and job crafting was reviewed in the following
sections to set hypotheses.
LGO
Goal orientation has been defined as one’s dispositional or situational goal preferences in
achievement situations (Payne et al., 2007). There are three types of goal orientation:
“learning goal orientation” (a desire to develop oneself by acquiring new skills, mastering
new situations and improving one’s competences); “performance-prove goal orientation”
(the desire to prove one’s competence and gain favorable judgments about them); and
“performance-avoid goal orientation” (the desire to avoid disapproval and negative
judgments with regard to one’s competences) (Vandewalle, 1997). A meta-analytic study
revealed that LGO was positively correlated, performance-avoid goal orientation was
negatively correlated, and performance-prove goal orientation was uncorrelated with
learning and performance (Payne et al., 2007). Furthermore, LGO has been shown to have
positive impacts on intrinsic motivation, leading to skill improvement (Hirst et al., 2009),
self-regulation (Bouffard et al., 1995), seeking out self-improvement information (Janssen
and Prins, 2007), innovative performance (Lu et al., 2012) and metacognitive activity,
including planning, monitoring and revising goal-appropriate behavior (Ford et al., 1998).
These results suggest that LGO is a strong driver of self-regulated learning for
improvement and innovation.
Accordingly, previous research has indicated that individuals holding a learning goal
view challenging tasks as opportunities to learn, whereas individuals holding a performance
goal perceive challenging tasks as inherently risky because they fear that they might fail
and reveal their inadequate abilities to others (Dragoni et al., 2009). Consistent with this
argument, Adriaenssens et al. (2015) and Jones et al. (2017) reported a positive relationship
between LGO and work engagement. Although some studies demonstrate that
performance-prove and performance-avoid orientations have positive effects on
performance outcomes, the results were mixed and unclear (e.g. Janssen and Prins, 2007;
Porter et al., 2010). Therefore, this study focused on LGO among the three goal orientations
and predicted that LGO may directly promote work engagement by enhancing an
employee’s intrinsic work motivation (Cerasoli and Ford, 2014). Based on the characteristics
of LGO and previous empirical findings, the following hypothesis is proposed:
H1. LGO is positively related to work engagement.
Job crafting
Wrzesniewski and Dutton (2001) conceptualized the process of job crafting, which refers to
the physical and cognitive changes that individuals make in the tasks or relational
boundaries of their work. Referring to the following examples: “Hospital cleaners integrated
caring for patients and families into the workflow of their floor units” (Wrzesniewski and
Dutton, 2001) and “A maintenance technician started proactively to help newcomers to learn
the job” (Berg et al., 2010). These examples suggest that job crafting is a self-initiated change
in behavior that employees engage in, with the aim of aligning their jobs with their own
preferences, motives and passions (Tims et al., 2012).
Based on the “JD-R model” (Bakker and Demerouti, 2007), Bakker et al. (2012) defined job
crafting as the changes employees may make regarding their job demands and job
222
PR
48,1
resources. Tims et al. (2012) proposed that job crafting consists of four dimensions:
increasing structural job resources, increasing social job resources, increasing challenging
job demands and decreasing hindering job demands. Regarding the effects of these
dimensions, Petrou et al. (2012) conceptualized job crafting as “seeking resources,” “seeking
challenges” and “reducing demands,” and found that seeking challenges was positively
associated with work engagement, whereas reducing demands was negatively associated
with work engagement. Similarly, Demerouti et al. (2015) reported that seeking resources
had a positive indirect relationship with extra-role behavior such as contextual performance
and creativity, whereas reducing demands had negative indirect relationships with extra-
role behaviors through work engagement.
Of the four dimensions of job crafting, this research focused on increasing job demands
as a form of “seeking challenges.” This is because the dimension has the most essential
characteristics of job crafting, in which employees redesign their jobs by themselves.
Seeking challenges refers to redesigning jobs into more challenging ones, whereas seeking
resources involves activities that expand personal networks for social supports or rewards
that are not directly linked to the job design itself. As work engagement refers to a
work-related state of mind involving intrinsic motivation (Demerouti et al., 2015;
Schaufeli et al., 2002), this study only analyzed the seeking out of challenges that may
directly affect the characteristics of jobs.
As mentioned above, it is reasonable to hypothesize that job crafting (seeking challenges)
may mediate the relationship between LGO and work engagement, because LGO may
intrinsically motivate employees to redesign their jobs into more challenging ones, which
would then facilitate further engagement in their work. This relationship can be predicted
by SDT, which proposes combining goals and autonomous orientations to promote an
individual’s engagement and learning at work (Deci and Ryan, 2008, 2011; Vansteenkiste
et al., 2006). Considering these arguments and past studies on the job crafting–work
engagement relationship (Crawford et al., 2010; Lu et al., 2014; Petrou et al., 2012), the
following hypothesis is proposed:
H2. Job crafting (seeking challenges) partially mediates the relationship between LGO
and work engagement.
Reflection
To redesign our jobs, it is necessary to reflect on our activities and practices. According to
Kolb’s (1984) experiential learning model, reflection is an essential process for learning from
experience. Kolb proposed a four-stage cyclical model involving the following steps:
concrete experience, reflective observation, abstract conceptualization and active
experimentation (Kolb, 1984). Specifically, we extract abstract hypotheses or concepts by
reflecting on our personal experience, and the lessons guide us to create new experiences.
To gain maximum developmental benefits from work experiences, it is important to reflect
on experiences, to extract lessons. Transformative learning theory also assumes that
reflection or critical reflection plays a key role in adult learning (Mezirow and Taylor, 2011;
Taylor, 2007).
Following West (2000), in the present study, reflection is defined as the extent to which
an individual periodically reviews his or her work objectives and methods. This definition
suggests that “reflection” is a disposition or tendency to reflect on activities or practices.
According to social cognitive theory, reflection is a significant motivational force in
self-regulation (Van Seggelen-Damen and Van Dam, 2016). As Kolb’s (1984) experiential
learning model suggests, individuals who periodically review their work experiences may
gain many ideas or lessons on how to change the elements of their jobs. From the viewpoint
of SDT and experiential learning theory, reflection may be necessary for individuals aiming
223
Effect of
learning goal
orientation
to craft their jobs in an autonomous manner. Specifically, individuals must ensure that their
work processes or practices line up with their goals to acquire new skills or knowledge when
crafting their jobs. Thus, it seems reasonable to hypothesize that the effect of LGO on job
crafting may be stronger when reflection is high (vs low). Thus, the following hypothesis is
proposed:
H3. Reflection positively moderates the relationship between LGO and job crafting
(seeking challenges).
The conceptual framework of this study draws on the literature on job crafting, reflection,
goal orientation and work engagement. As shown in Figure 1, the framework posits the
moderated mediation model in which LGO directly and indirectly influences work
engagement through job crafting (seeking challenges), and reflection moderates the
relationship between LGO and job crafting (seeking challenges).
Methods
Procedure and participants
Participants for this study were public health nurses and hospital nurses who participated
in two independent training programs for human resource development. Nurses were
chosen as subjects because they are professionals who have a certain level of autonomy in
performing their tasks. The first program was administrated by a prefectural government
for public health nurses working in northern Japan, whereas the second program was
administrated by a medical university for hospital nurses working across a wide range of
areas in Japan. Administrative offices of the programs invited participants to answer a
questionnaire before the programs began. Questionnaires were sent by e-mail to
303 nurses (144 public health nurses and 159 hospital nurses). The response rate was
87.7 percent with 266 usable responses (123 public health nurses and 150 hospital nurses).
The sample consisted of 91.8 percent females and 8.2 percent males. The distribution of
participants’ ages was as follows: 29 years and younger (5.9 percent), 30–39 (30.1 percent),
40–49 (46.5 percent) and 50 years and older (16.5 percent). The positions in the
organizations were staff (28.7 percent), junior manager (58.2 percent), middle manager
(11.2 percent) and senior manager (1.9 percent).
Measures
Reflection was assessed using a five-item scale, from West (2000). Sample items were
“I often review my work objectives,” and “I often review my approach to getting the job
done.” Each item measured reflection on a five-point Likert scale (1 ¼ strongly disagree,
5 ¼ strongly agree; α ¼ 0.79). The average scores of the items were used in the analyses.
LGO was measured using a five-item scale selected from Vandewalle (1997). Sample
items were: “I am willing to select a challenging work assignment that I can learn a lot from,”
and “I prefer to work in situations that require a high level of ability and talent.” Each item
Reflection
Work engagement
Job crafting
(seeking challenges)
Learning goal
orientation H1
H3
H2 H2
Figure 1.
Research model
224
PR
48,1
measured LGO on a five-point Likert scale (1 ¼ strongly disagree, 5 ¼ strongly agree;
α ¼ 0.82). The average scores of the items were used in the analyses.
Job crafting was measured with a five-item scale from Tims et al. (2012), who developed
the scales of “increasing challenging job demands.” Sample items were: “If there are new
developments, I am one of the first to learn about them and try them out” and “I try to make
my work more challenging by examining the underlying relationships between aspects of
my job.” Each item measured job crafting on a five-point Likert scale (1 ¼ strongly disagree,
5 ¼ strongly agree; α ¼ 0.72). The average scores of the items were used in the analyses.
Work engagement was assessed using a nine-item scale developed by Schaufeli et al.
(2006). Sample items were: “At my job, I feel strong and vigorous” and “I am enthusiastic
about my job.” Each item measured work engagement on a five-point Likert scale
(1 ¼ never, 5 ¼ always). As the scale consists of three dimensions (vigor, dedication, and
absorption), items in each dimension were averaged to create dimension scores; then, the
averages of these dimension scores were used in the analyses (α ¼ 0.85).
Social desirability was measured to prevent potential common method bias, using a
five-item scale derived from Paulhus (1991). Sample items were: “I never regret my
decisions” and “I am very confident of my judgments.” Each item measured social
desirability on a five-point Likert scale (1 ¼ strongly disagree, 5 ¼ strongly agree; α ¼ 0.70).
The averages of the items were used in the analyses.
As control variables, dichotomous dummy variables for gender (1 ¼ female, 2 ¼ male)
and job type (1 ¼ public health nurse, 2 ¼ hospital nurse), organizational position
(1 ¼ staff, 2 ¼ junior manager, 3 ¼ middle manager, 4 ¼ senior manager) and age (1 ¼ 20s,
2 ¼ 30s, 3 ¼ 40s, 4 ¼ 50s, 5 ¼ over 60s) were included in the equation.
Validation of measures
The internal consistency of the constructs was evaluated using Cronbach’s α statistic.
Cronbach’s α values for reflection, LGO, job crafting and work engagement were 0.79, 0.80, 0.72
and 0.85, respectively. All of the scales met the recommended reliability coefficient of 0.70
(Nunnally, 1978). To evaluate the convergent validity of the model constructs, a confirmatory
factor analysis was conducted with four latent learning constructs (reflection, LGO, job crafting
and work engagement) and a total of 23 items. The results showed that all of the items loaded
significantly on the respective constructs; the goodness-of-fit statistics for the model were as
follows: χ2 ¼ 233.62 (df¼ 129, po0.001), χ2/df¼ 1.811, comparative fit index (CFI)¼ 0.940, root
mean square error of approximation (RMSEA)¼ 0.055 and standardized root mean square
residual (SRMR) ¼ 0.055. Considering the cut-off value criteria proposed in previous studies
(χ2/dfo2.0, CFIW0.90, RMSEAo0.06 and SRMRo0.08) (Hu and Bentler, 1999; Lane et al.,
2006), the fit indices of the model were acceptable.
Assessment of common method bias
Because the data were collected from self-reported questionnaires measured by a single source,
there was a possibility that the results of the study would suffer from common method bias. To
address the issue, the following four diagnostic analyses were conducted. First, Harman’s one-
factor method was used. This method assumes that a substantial amount of common method
variance is present when a single factor emerges from a factor analysis, or that one general
factor accounts for the majority of the covariance among the measures (Podsakoff et al., 2003).
A principal component factor analysis with items for all of the variables, including control
variables, extracted six factors with the first factor accounting for 24.53 percent of the variance.
These results indicate that a serious common method bias was not present in this study.
Second, the partial correlation procedure proposed by Lindell and Whitney (2001) was
applied. An item “I have a lot in common with the people around me” of the revised UCLA
Loneliness Scale (Russell et al., 1980) was used as the theoretically unrelated marker
225
Effect of
learning goal
orientation
variable. Then, the effects of this variable were partialed out from the relationships among
reflection, LGO, job crafting and work engagement. The results indicated that the original
correlation matrix among variables was quite similar to the partial correlation matrix, which
suggested that common method bias did not affect the results.
Third, fit indices demonstrated that the four-factor model fit the data much better than
the single-factor, two-factor and three-factor models (Table I). These results indicate that the
influence of common method bias was minimized in this study (Podsakoff et al., 2003).
Finally, social desirability was assessed as a control variable in the analyses. This was
done to reduce the tendency to respond in a socially desirable manner, which causes a
common method variance (Podsakoff et al., 2003).
Results
Table II lists the means, standard deviations, reliability and correlations of variables.
Reflection, LGO, job crafting and work engagement correlated significantly in the expected
direction. To examine the moderated mediation model proposed, the SPSS macro PROCESS,
developed by Hayes (2012), was used.
Table III lists the results of the moderated mediation analyses for examining H1–H3.
As predicted by H1, LGO was positively related to work engagement ( β ¼ 0.20, po0.01).
Table III also indicates that LGO was positively related to job crafting (seeking challenges)
( β ¼ 0.40, po0.001), which resulted in higher work engagement ( β ¼ 0.42, po0.001).
The results suggest that job crafting (seeking challenges) mediates the relationship between
LGO and work engagement. To assess the significance of the conditional indirect effect of
job crafting (seeking challenges), bias-corrected bootstrapped confidence intervals were
calculated. Separate models were examined for each moderator that tested the indirect
effect between LGO and work engagement under three different values of each moderator
(−1 standard deviation, mean, +1 standard deviation). As shown in Table IV, the assumed
moderated-indirect relationships were significant for all values. Thus, H2 was supported.
Table III shows that reflection positively moderated the relationship between LGO and
job crafting (seeking challenges) (β ¼ 0.21, po0.05), which supports H3. Specifically, as
shown in Figure 2, the relationship between LGO and job crafting (seeking challenges) was
stronger when reflection was higher (vs lower).
Discussion
Although LGO has been shown to influence work engagement, its mediators have not been
sufficiently investigated in previous research. As shown in Figure 3, LGO facilitated work
engagement through job crafting (seeking challenges), and the relationship was stronger
Models χ2 df χ²/df CFI SRMR RMSEA
M1: 4-factor model 233.62 129 1.811 0.940 0.055 0.055
M2: 3-factor model (JC + WE, R and LO) 373.39 132 2.829 0.861 0.080 0.083
M4: 3-factor model (LO + WE, JC and R) 487.25 132 3.691 0.795 0.075 0.101
M3: 3-factor model (JC + LO, R and WE) 456.14 133 3.430 0.814 0.075 0.101
M5: 2-factor model (JC + WE and R + LO) 629.39 134 4.697 0.714 0.110 0.118
M6: 2-factor model (LO + WE and JC + R) 680.91 134 5.081 0.685 0.102 0.124
M7: 1-factor model 770.66 135 5.709 0.634 0.108 0.133
Notes: n ¼ 266. JC, job crafting; WE, work engagement; R, reflection; LO, learning goal orientation; CFI,
comparative fit index; SRMR, standardized root mean square residual; RMSEA, root mean square error of
approximation. Four-factor model: each variable was loaded on a single factor; one-factor: all variables were
loaded on a single factor
Table I.
Confirmatory factor
analyses comparing
alternative
measurement models
226
PR
48,1
V
ar
ia
bl
es
M
SD
1
2
3
4
5
6
7
8
1.
Jo
b
ty
pe
1.
54
0.
50
–
2.
G
en
de
r
1.
08
0.
28
0.
11
–
3.
A
ge
2.
73
0.
82
0.
02
−
0.
14
*
–
4.
P
os
it
io
n
2.
09
0.
87
−
0.
13
*
−
0.
11
0.
41
**
*
–
5.
So
ci
al
de
si
ra
bi
lit
y
2.
59
0.
54
0.
16
*
0.
05
0.
16
**
0.
17
**
(0
.7
0)
6.
L
ea
rn
in
g
go
al
or
ie
nt
at
io
n
3.
41
0.
63
0.
21
**
0.
26
**
*
0.
04
−
0.
11
0.
24
**
*
(0
.8
0)
7.
R
ef
le
ct
io
n
3.
61
0.
50
0.
01
0.
03
0.
10
0.
15
*
0.
17
**
0.
33
**
*
(0
.7
9)
8.
Jo
b
cr
af
ti
ng
(s
ee
ki
ng
ch
al
le
ng
es
)
3.
19
0.
54
0.
17
**
0.
13
*
0.
10
−
0.
02
0.
28
**
*
0.
56
**
*
0.
34
**
*
(0
.7
2)
9.
W
or
k
en
ga
ge
m
en
t
3.
00
0.
62
0.
22
**
*
0.
16
*
0.
16
*
−
0.
05
0.
20
**
0.
45
**
*
0.
23
**
*
0.
52
**
*
(0
.8
5)
N
o
te
s:
n
¼
26
6.
C
ro
nb
ac
h’
s
α
s
ar
e
re
po
rt
ed
al
on
g
th
e
di
ag
on
al
.
Jo
b
ty
pe
:
1
¼
pu
bl
ic
he
al
th
nu
rs
e,
2
¼
ho
sp
it
al
nu
rs
e.
A
ge
:
1
¼
20
s,
2
¼
30
s,
3
¼
40
s,
4
¼
ov
er
50
s.
*p
o
0.
05
;*
*p
o
0.
01
;*
**
p
o
0.
00
1
Table II.
Means, standard
deviations, reliabilities
and correlations of the
study variables
227
Effect of
learning goal
orientation
when reflection was high (vs low). A major contribution of this study was to identify the
moderated and mediating relationship whereby LGO promoted work engagement in terms
of job crafting and reflection, based on a self-determination perspective.
Theoretical implications
This paper has three theoretical implications. First, the present research extends the
literature by showing the mediating effect of job crafting (seeking challenges) between LGO
Regression results of the moderated mediation model
Job crafting (seeking challenges) Work engagement
Predictor β SE t β SE t
Reflection 0.17 0.06 3.01**
Learning goal orientation 0.40 0.05 7.96*** 0.20 0.06 3.00**
Reflection × Learning goal orientation 0.21 0.08 2.45*
Job crafting (seeking challenges) 0.42 0.07 5.87***
Control variable
Job type 0.06 0.06 0.98 0.12 0.07 1.80
Gender 0.01 0.10 0.07 0.13 0.12 1.11
Age 0.03 0.04 0.81 0.11 0.04 2.53*
Position −0.01 0.04 −0.38 −0.05 0.04 −1.20
Social desirability 0.13 0.05 2.43* 0.03 0.06 0.43
R2 0.38 0.34
F 19.48*** 18.87***
Notes: n ¼ 266. *po0.05; **po0.01; ***po0.001
Table III.
Results of
regression analyses
95\% CI
Value of moderator (reflection) Conditional indirect effect SE Lower Upper
−1 …
CATEGORIES
Economics
Nursing
Applied Sciences
Psychology
Science
Management
Computer Science
Human Resource Management
Accounting
Information Systems
English
Anatomy
Operations Management
Sociology
Literature
Education
Business & Finance
Marketing
Engineering
Statistics
Biology
Political Science
Reading
History
Financial markets
Philosophy
Mathematics
Law
Criminal
Architecture and Design
Government
Social Science
World history
Chemistry
Humanities
Business Finance
Writing
Programming
Telecommunications Engineering
Geography
Physics
Spanish
ach
e. Embedded Entrepreneurship
f. Three Social Entrepreneurship Models
g. Social-Founder Identity
h. Micros-enterprise Development
Outcomes
Subset 2. Indigenous Entrepreneurship Approaches (Outside of Canada)
a. Indigenous Australian Entrepreneurs Exami
Calculus
(people influence of
others) processes that you perceived occurs in this specific Institution Select one of the forms of stratification highlighted (focus on inter the intersectionalities
of these three) to reflect and analyze the potential ways these (
American history
Pharmacology
Ancient history
. Also
Numerical analysis
Environmental science
Electrical Engineering
Precalculus
Physiology
Civil Engineering
Electronic Engineering
ness Horizons
Algebra
Geology
Physical chemistry
nt
When considering both O
lassrooms
Civil
Probability
ions
Identify a specific consumer product that you or your family have used for quite some time. This might be a branded smartphone (if you have used several versions over the years)
or the court to consider in its deliberations. Locard’s exchange principle argues that during the commission of a crime
Chemical Engineering
Ecology
aragraphs (meaning 25 sentences or more). Your assignment may be more than 5 paragraphs but not less.
INSTRUCTIONS:
To access the FNU Online Library for journals and articles you can go the FNU library link here:
https://www.fnu.edu/library/
In order to
n that draws upon the theoretical reading to explain and contextualize the design choices. Be sure to directly quote or paraphrase the reading
ce to the vaccine. Your campaign must educate and inform the audience on the benefits but also create for safe and open dialogue. A key metric of your campaign will be the direct increase in numbers.
Key outcomes: The approach that you take must be clear
Mechanical Engineering
Organic chemistry
Geometry
nment
Topic
You will need to pick one topic for your project (5 pts)
Literature search
You will need to perform a literature search for your topic
Geophysics
you been involved with a company doing a redesign of business processes
Communication on Customer Relations. Discuss how two-way communication on social media channels impacts businesses both positively and negatively. Provide any personal examples from your experience
od pressure and hypertension via a community-wide intervention that targets the problem across the lifespan (i.e. includes all ages).
Develop a community-wide intervention to reduce elevated blood pressure and hypertension in the State of Alabama that in
in body of the report
Conclusions
References (8 References Minimum)
*** Words count = 2000 words.
*** In-Text Citations and References using Harvard style.
*** In Task section I’ve chose (Economic issues in overseas contracting)"
Electromagnetism
w or quality improvement; it was just all part of good nursing care. The goal for quality improvement is to monitor patient outcomes using statistics for comparison to standards of care for different diseases
e a 1 to 2 slide Microsoft PowerPoint presentation on the different models of case management. Include speaker notes... .....Describe three different models of case management.
visual representations of information. They can include numbers
SSAY
ame workbook for all 3 milestones. You do not need to download a new copy for Milestones 2 or 3. When you submit Milestone 3
pages):
Provide a description of an existing intervention in Canada
making the appropriate buying decisions in an ethical and professional manner.
Topic: Purchasing and Technology
You read about blockchain ledger technology. Now do some additional research out on the Internet and share your URL with the rest of the class
be aware of which features their competitors are opting to include so the product development teams can design similar or enhanced features to attract more of the market. The more unique
low (The Top Health Industry Trends to Watch in 2015) to assist you with this discussion.
https://youtu.be/fRym_jyuBc0
Next year the $2.8 trillion U.S. healthcare industry will finally begin to look and feel more like the rest of the business wo
evidence-based primary care curriculum. Throughout your nurse practitioner program
Vignette
Understanding Gender Fluidity
Providing Inclusive Quality Care
Affirming Clinical Encounters
Conclusion
References
Nurse Practitioner Knowledge
Mechanics
and word limit is unit as a guide only.
The assessment may be re-attempted on two further occasions (maximum three attempts in total). All assessments must be resubmitted 3 days within receiving your unsatisfactory grade. You must clearly indicate “Re-su
Trigonometry
Article writing
Other
5. June 29
After the components sending to the manufacturing house
1. In 1972 the Furman v. Georgia case resulted in a decision that would put action into motion. Furman was originally sentenced to death because of a murder he committed in Georgia but the court debated whether or not this was a violation of his 8th amend
One of the first conflicts that would need to be investigated would be whether the human service professional followed the responsibility to client ethical standard. While developing a relationship with client it is important to clarify that if danger or
Ethical behavior is a critical topic in the workplace because the impact of it can make or break a business
No matter which type of health care organization
With a direct sale
During the pandemic
Computers are being used to monitor the spread of outbreaks in different areas of the world and with this record
3. Furman v. Georgia is a U.S Supreme Court case that resolves around the Eighth Amendments ban on cruel and unsual punishment in death penalty cases. The Furman v. Georgia case was based on Furman being convicted of murder in Georgia. Furman was caught i
One major ethical conflict that may arise in my investigation is the Responsibility to Client in both Standard 3 and Standard 4 of the Ethical Standards for Human Service Professionals (2015). Making sure we do not disclose information without consent ev
4. Identify two examples of real world problems that you have observed in your personal
Summary & Evaluation: Reference & 188. Academic Search Ultimate
Ethics
We can mention at least one example of how the violation of ethical standards can be prevented. Many organizations promote ethical self-regulation by creating moral codes to help direct their business activities
*DDB is used for the first three years
For example
The inbound logistics for William Instrument refer to purchase components from various electronic firms. During the purchase process William need to consider the quality and price of the components. In this case
4. A U.S. Supreme Court case known as Furman v. Georgia (1972) is a landmark case that involved Eighth Amendment’s ban of unusual and cruel punishment in death penalty cases (Furman v. Georgia (1972)
With covid coming into place
In my opinion
with
Not necessarily all home buyers are the same! When you choose to work with we buy ugly houses Baltimore & nationwide USA
The ability to view ourselves from an unbiased perspective allows us to critically assess our personal strengths and weaknesses. This is an important step in the process of finding the right resources for our personal learning style. Ego and pride can be
· By Day 1 of this week
While you must form your answers to the questions below from our assigned reading material
CliftonLarsonAllen LLP (2013)
5 The family dynamic is awkward at first since the most outgoing and straight forward person in the family in Linda
Urien
The most important benefit of my statistical analysis would be the accuracy with which I interpret the data. The greatest obstacle
From a similar but larger point of view
4 In order to get the entire family to come back for another session I would suggest coming in on a day the restaurant is not open
When seeking to identify a patient’s health condition
After viewing the you tube videos on prayer
Your paper must be at least two pages in length (not counting the title and reference pages)
The word assimilate is negative to me. I believe everyone should learn about a country that they are going to live in. It doesnt mean that they have to believe that everything in America is better than where they came from. It means that they care enough
Data collection
Single Subject Chris is a social worker in a geriatric case management program located in a midsize Northeastern town. She has an MSW and is part of a team of case managers that likes to continuously improve on its practice. The team is currently using an
I would start off with Linda on repeating her options for the child and going over what she is feeling with each option. I would want to find out what she is afraid of. I would avoid asking her any “why” questions because I want her to be in the here an
Summarize the advantages and disadvantages of using an Internet site as means of collecting data for psychological research (Comp 2.1) 25.0\% Summarization of the advantages and disadvantages of using an Internet site as means of collecting data for psych
Identify the type of research used in a chosen study
Compose a 1
Optics
effect relationship becomes more difficult—as the researcher cannot enact total control of another person even in an experimental environment. Social workers serve clients in highly complex real-world environments. Clients often implement recommended inte
I think knowing more about you will allow you to be able to choose the right resources
Be 4 pages in length
soft MB-920 dumps review and documentation and high-quality listing pdf MB-920 braindumps also recommended and approved by Microsoft experts. The practical test
g
One thing you will need to do in college is learn how to find and use references. References support your ideas. College-level work must be supported by research. You are expected to do that for this paper. You will research
Elaborate on any potential confounds or ethical concerns while participating in the psychological study 20.0\% Elaboration on any potential confounds or ethical concerns while participating in the psychological study is missing. Elaboration on any potenti
3 The first thing I would do in the family’s first session is develop a genogram of the family to get an idea of all the individuals who play a major role in Linda’s life. After establishing where each member is in relation to the family
A Health in All Policies approach
Note: The requirements outlined below correspond to the grading criteria in the scoring guide. At a minimum
Chen
Read Connecting Communities and Complexity: A Case Study in Creating the Conditions for Transformational Change
Read Reflections on Cultural Humility
Read A Basic Guide to ABCD Community Organizing
Use the bolded black section and sub-section titles below to organize your paper. For each section
Losinski forwarded the article on a priority basis to Mary Scott
Losinksi wanted details on use of the ED at CGH. He asked the administrative resident